SACC-CIP-M12FS-12P SMD T

https://www.phoenixcontact.com/pi/products/1411940 Flush-type connector - SACC-CIP-M12FS-12P SMD T - 1411940 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, 12-position, Socket, straight, M12, A - standard, PCB mounting, SMD Your advantages  Reduced mounting costs thanks to two-piece device connector  Packaging available for automated pick and place assembly  All common pin assignments and codings available  Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate  Additional gasket for the device when not plugged in Key Commercial Data Packing unit 60 pc Minimum order quantity 60 pc GTIN GTIN 4046356989534 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 105 °C (Plug / socket) -40 °C ... 105 °C (without mechanical actuation) Degree of protection IP67 (correctly plugged in and locked) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V 05/16/2019   Page 1 / 4 https://www.phoenixcontact.com/pi/products/1411940 Flush-type connector - SACC-CIP-M12FS-12P SMD T - 1411940 Technical data General Rated surge voltage 0.8 kV Number of positions 12 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 In line with Overvoltage category III Degree of pollution 3 Connection method SMD Insertion/withdrawal cycles > 100 Mounting type PCB mounting Type of packaging Tray Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Sealing material FKM Cable Standards/specifications M12 connector IEC 61076-2-101 In line with Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 05/16/2019   Page 2 / 4 https://www.phoenixcontact.com/pi/products/1411940 Flush-type connector - SACC-CIP-M12FS-12P SMD T - 1411940 Schematic diagram 3 11 4 2,9 5 9 12 8 6 7 2,3 2,52 0,74 1,13 0,55 1,1 Ø1,5⁰⁰³ 9!⁰⁰² Ø1,1 5,61 2,25 13,6 1,91 Pin assignment M12 socket, 12-pos., A-coded, view female side 5,34 1 3,54 2 2,86 10 Drilling diagram Ø1,1⁰⁰³ Ø2,5 7,85 Soldering pad geometry 18 Ø1!⁰⁰³ 12,7 9!⁰⁰⁵ Ø8,2 Dimensional drawing Ø10,2 Ø0,7⁰⁰⁵ Ø1,4!⁰⁰³ Dimensional drawing M12 socket, straight 1,35 7,25 View of solder side Dimensional drawing SMD tray packaging 05/16/2019   Page 3 / 4 https://www.phoenixcontact.com/pi/products/1411940 Flush-type connector - SACC-CIP-M12FS-12P SMD T - 1411940 Approvals Approvals Approvals EAC / cULus Recognized Ex Approvals Approval details EAC   cULus Recognized      B.01742  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20160506     Nominal voltage UN 30 V Nominal current IN 1.5 A Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 05/16/2019   Page 4 / 4